
3251 - pneumatic - ANSI
Globe valve
VALVE STYLE
							Globe valve
						
USAGE
- On/off service
- High-pressure service
- Throttling service
- Low-pressure service
VERSION
						
							ANSI
						
					
MEDIUM TEMPERATURE
						
							
									-196
									to 550 °C /
									-320.8
									to
									1022 °F
								
						
					
SUPPLY
						
							Pneumatic
						
					
VALVE SIZE
						
						
							
									NPS ½
									to
									NPS 20
PRESSURE RATING
						
						
							
									Class 150
									to
									Class 2500
LINING
							without
						
Special features
- Consisting of globe valve and actuator
- Also available as additively manufactured Type 3251-AM Valve
- Low-noise valve plug
- Pressure balancing to handle large pressure drops
- Optionally including RFID transponder with unique marking according to DIN SPEC 91406
Accessories
- Type 2 N Strainer
- Type 2 NI Strainer
Options
- Welding or welding-neck ends
- Flow divider or AC-trim for noise reduction
- Insulating section or bellows seal
- Heating jacket
- Perforated plug
- Silencers
3251 - pneumatic - ANSI can be combinated with the following actuations:
Special features:
- Single-acting linear actuator with rolling diaphragm and internal springs
- Diaphragm areas from 120 to 2x2800 cm²
- Low overall height
- Powerful thrust at high stroking speed
- Low friction
- Various bench ranges by varying the number of springs or their compression
- No special tools required to change the bench range or reverse the direction of action (also version with handwheel)
Special features:
- Single-acting linear actuator with rolling diaphragm and internal springs
- Diaphragm areas from 120 to 750 cm²
- Direct attachment of accessories on additional yoke with concealed travel pick-off
- Low overall height
- Powerful thrust at high stroking speed
- Low friction
- Various bench ranges by varying the number of springs or their compression
- No special tools required to change the bench range or reverse the direction of action (also version with handwheel)
Special features:
- Spindle actuator with non-rising handwheel
- Handwheel diameter 180 or 250 mm
- Low overall height
- Simple connection to the valve
- Locking mechanism to secure the valve stem position against accidental adjustment
Information
- AB 0100 Servicing SAMSON Products
 Tightening Torques · Lubricants · ToolsElectric and Pneumatic Control Valves[EN][DE]
 Type 3241, Type 3244, Type 3246, Type 3248, Type 3249, Type 3510, Type 3321, Type 3321CT, Type 3323, Type 3271, Type 3277, Type 3371, Type 3372, Type 3571, Type 3251, Type 3253, Type 3254, Type 3256, Type 3259, Type 3281, Type 3286, Type 3291, Type 3296, Type 3349, Type 3275, Type 3275A and Type 3310 (edition 2020)
- T 8084 Type 3381 Silencer
 for Type 3251, Type 3254, Type 3256 and Type 3241DIN and ANSI versions[EN][DE][FR]
- T 8087 Control Valves with Zero Travel 1 Trim
 for Type 3251 and Type 3256DIN and ANSI versions[EN][DE]
- T 8083 Series 250 · Pneumatic Control Valves with AC‑3 or AC‑5 Trim
 [EN][DE][RU]
- T 8082 Pneumatic Control Valves with AC‑1 Trim
 [EN][DE]
- T 8081 Flow Dividers for Control Valves
 St 1 · St 2 · St 3
 [EN][DE][FR]
- T 8071 Control Valves with Ceramic Trims
 [EN][DE][IT][RU]
- T 8086 Valves with perforated plugDIN and ANSI versions[EN][DE]
- T 8052 Type 3251-1/3251-AM-1 and Type 3251-7/3251-AM-7 Pneumatic Control Valves
 Type 3251 and Type 3251-AM Globe ValveANSI version[EN][DE]
- T 8000-6 Information sheet
 Packings for Globe ValvesPacking forms and their application ranges[EN][DE]
- T 8000-1 Information Sheet:
 Electric and Pneumatic Control Valves
 Series 240 · 250 · 290 · Series V2001 · PFEIFFER
 [EN][DE]
- T 8000-2 Information Sheet:
 Electric and Pneumatic Control Valves
 Series 240 • 250 • 290 • SAMSON PFEIFFERMaterials and pressure-temperature diagrams[EN][DE]
- T 8000-3 Information Sheet:
 Electric and Pneumatic Control ValvesSeries 240 • 250[EN][DE]
 Flow coefficients for valves
 Type 3241 • Type 3248 • Type 3249 • Type 3251 • Type 3321 • Type 3347 • Type 3598
- T 8000-4 Series 240 · 250 · 280
 Pneumatic Control Valves
 Information Sheet Part 4
 Permissible differential pressures for valves
 Type 3241 · Type 3251 · Type 3254 · Type 3256 Type 3281 · Type 3284 · Type 3286
 [EN][DE]
Support
Certificates
Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.
Pin items on your list and contact us if you have any product-related questions.
Back to product selector